Q235 6M LED street light pole
Product Description
6M LED Street Light pole design
Hot Galvanized Steel Pole Technical Details:
Material | Hot Rolled Steel Q235 |
Yield Strength of Material | Minimum Yield Strength ≥235n/mm2 |
Pole Height | 6M above ground, shape as below |
Wall Thickness | 3mm |
Pole Shape | Conical |
Welding | Advanced submerge-arc welding and CNC welding equipment. |
Galvanization | Hot dip galvanization. |
Wall thickness Tolerance | +- 0.1mm from 2.3mm to 4mm. +- 0.2mm from 5mm to 20mm. +- 0.5mm from 22mm to 30mm |
Painting color | (RAL)Color card or Refer to client`s requirement |
Temperature range | -35 °C~+45 °C |
Wind Speed | Against wind pressure of 150Km/h to 180Km/h, it according to client`s design. |
Base plate mounted | Square,Size: 240*240mm,260*260mm,320*320mm,360*360mm,etc. |
Quality Control | According to ISO9001-2008 requirements |
Certificates | ISO9001-2008, SGS Audited Supplier, The AAA grade |
Lifespan | 20-25years |
Warranty | 5 Years |
Hot-dip-galvanized Steel Pole,Spray Coated Street Light Pole
Pole Height:3M to 15M,
All Pole designs will withstand a gusted wind velocity of 150 KM/H
Pole Materials
1.All materials utilized by Pole meet or exceed international. Standards or on Customize Request.
2.Poles are produced using steel, "self-weathering" steel Q235B SS400, Q235,( 55938852, 55938631,yield strength: 235Pa
24kg/mm2 Tensile Strength: 375-460Pa 38-47kg/mm2
Welding
The main body pole adopts the technology of the disposable shaping , The welding seam is level and
smooth, The welding of the light post is the automatic Asian arc welding, All welding done by Pole
conforms to GB/T3323-1989111. Any circumferential welds are 100% penetration with some shaft to
baseplates jointed with inside and outside fillet welds, and longitudinal welds have a minimum penetration
of of 60%.
Finishes
There are Four finishes Available for the Tubular Poles:
1) Rugh Cast
2) Prime Paint
3) The antiseptic disposing of the lamp pole is the hot galvanizing and the surface is smooth and beautiful,
Hot Dip Galvanizing according GB2694-88
4) Powder Coat according GBP286-880
5) Powder Coat over Hot Dip Galvanizing
Accessories
Anchor Bolts, Nut & Bolt Cover
• Available in M10- M32 [J" Type and [I" Type Anchor Bolts
• Hot Dip Galvanized
• Supplied with Hexagon Nut and Washer
• High Strength Polyurethane
Handhole
•Pole is supplied with customize handhole, grounding stud , handhole cover and theft-proof lock
The standard tenon size is 60mm/76mm O.D.
Any designs not shown in this catalogue can be produced by customer`s requirements,
and inquiries should be communicated to company representatives.
Approval drawings are available on request.
All measurements shown here are imperial measure (mm. M, kg )
Product Categories : Steel Pole